1. Mango powder description:
Spray dried mango powder is used in a wide variety of applications including seasoning blends, sauces, soups and stews, pasta products, chips and snacks, ready meals, and pet food products.
There are several ways to make mango powder, for example, sun-dried, hot-air dried, freeze dried, etc.But most popular is spray dried tomato powder. Field fresh tomatoes are sorted, washed, crushed, pulped, spray dried and milled to powder.
2.SHJUMP Mango powder processing flow:
SHJUMP can offer mango powder processing line, either from fresh mango, or from ready mango puree in bulk.
System nachine includes:
1)mango receiving
2)mango washing
3)mango destoning
4)mango crushing
5)mango pulp pre-heating
6)mango pulping
7)mango pulp concentration
8)Spray drying
9) sterilization
10) filling and packing
The reference processing flowchart is as following:
3.Specification of spray dried tomato powder:
| Item |
Specification |
| Appearance |
mango powder |
| Odour |
Characteristic |
| Mesh Size |
100% through 80 mesh size |
| Loss on Drying |
≤5.0% |
| Ash |
≤5.0% |
| Total Plate Count |
≤1000cfu/g |
| Yeast &Mold |
≤100cfu/g |
| E.Coli. |
Negative |
| Salmonella |
Negative |
4.SHJUMP mango powder processing related machines:
5. Main Machine introduction ----Spray Drying Equipment:
Spray drying equipment and pressure-type centrifugal separation, depending on thematerial properties to choose different atomization. widely used in chemical, food, medicine and industry.
Centrifugal spray: apply to engage in viscosity or solid particles with the material, spraya wide operating flexibility. Production capacity can be designed to be adjusted within ± 25%.
Pressure spray tower: for low viscosity liquid materials and pure, high-pressure pump(8-20MPa), from a special nozzle.
Technical Note: The auxiliary equipment includes, air filters, air heater, dust separation equipment, knock powder devices, access devices and materials into the air exhaustdevice. High clean air filter can be used in effective fiber; run vacuum tower is 100-200 Pamore reasonable; drying tower when the wind speed is less than 0.4 m / s, fine dust about80% of a smooth settlement, usually cyclone and filter using two net system recovery.Cyclone cylinder and the cone is not more than five times the total height of the cylinder diameter is appropriate.
6.About Us:
Our company is the first company to manufacture complete food&beverage processing line in China and we are keeping leadership position in the tomato paste processing line for 50 years since 1968 when China introduce technique from Italy/German and start to manufacture.Till now, we have set up 46 tomato processing factory in domestic and oversea market.
We has independent intellectual property rights of several equipment, including: large vacuum evaporation concentrating equipment (1000L-60000L/H), large sterilization equipment (tube and tube in tube type 1T/H-50T/H), large drying equipment (water evaporation quantity 100-10000T/H), aseptic filling equipment, and many advanced pre-treatment equipment for different fruits. Among them, the concentrated equipment for juice and jam, with its high performance and ultra-low temperature , has gained high reputation in this industry; And large tube-in-tube sterilization equipment have gain major breakthrough in energy saving, saving 30% energy compared with the industry standard, which has owned the national patent (Patent No.: ZL 201120565107.2); Various types of advanced juicing and beating equipment have been ranking first for continuous 7 years regarding their quality and sales volume.
We are the best choice for mango powder processing in Turnkey Solution!
Thoughtful After-sale services:
1). We make accurate factory layout design according to customer's factory size; if the customer needed, we could make workshop design.
2). After receiving firm order and down payment, we start to apply for the Visa to your country immediately; while the machines arrives your factory, our engineers are ready to start for the commissioning service.
3). 1-2 of our engineers will go to your factory to install and adjust the processing line to realize normal production at shortest time.
4). Our engineers have responsibility to teach the workers how to operate, clean, maintain and repair all the machines, until the workers could well operate the processing line.
5). Our engineers can provide basic formula for the production, and help the customer to produce good quality food according customer's detailed formula
6). It normally costs 10-14 days for the commissioning service, and we supply 1 year guarantee from the date of completion of commissioning service.
Company show:
Contact Us:
To get more information of mango powder production line, please feel free to send your inquiry.
Kind reminder to dear customer:
|
please kindly understand that the mango powder production line is a highly customized product. Our company is capable to design a processing line with capacity 1T-20T per day. The machine configuration also will be varied based on the automation degree and the final products type you want to get.Therefore,If you need a quotation proposal from us, please contact our staff and offer the following data to serve you better:
1.What's the estimated capacity? Namely, How many fresh mangos you plan to process per day?
2.What will be the final package of your mango powder? in drum, in tinplate or in pouch or in bulk?Will your products facing wholesale market or retail market?
3.When and where you want to start this project?
4.Will this project be cost-oriented or quality-driven?
|
Audited Supplier 
3.Specification of spray dried tomato powder:
){kind=link}